Detailed Evaluation & Buyer Recommendation
AB Inflatables 28 VST 2012 vs AB Inflatables 8 VL 2010 — Which Inflatable Rigid Fits Your Needs?
When two boats share the same hull type — in this case both the AB Inflatables 28 VST 2012 and the AB Inflatables 8 VL 2010 are inflatable rigid designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
Size is the most obvious dividing line here. The AB Inflatables 28 VST 2012 measures 28,0 feet overall (2012), giving it roughly 19,5 additional feet of deck space compared to the AB Inflatables 8 VL 2010 at 8,5 feet (2010). Weight tells a clearer story for trailering families: the AB Inflatables 28 VST 2012 tips the scales at 2 853 lbs — 2 758 lbs more than the AB Inflatables 8 VL 2010 at 95 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 250 hp, the AB Inflatables 28 VST 2012 has a 242-hp advantage over the AB Inflatables 8 VL 2010's 8-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
For family outings this is probably the sharpest distinction between the two. The AB Inflatables 28 VST 2012 is rated for 25 passengers, while the AB Inflatables 8 VL 2010 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the AB Inflatables 28 VST 2012 could be the deciding factor.
Bottom line: Choose the AB Inflatables 28 VST 2012 if your priority is putting more people on the water — it handles 25 passengers and at 28,0 ft it has the deck room to back that rating up comfortably. The AB Inflatables 8 VL 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAB Inflatables
MakeAB Inflatables
Model Year2012
Model Year201
Measurements / Dimensions
Beam10 ft. 1 in. (3.07 m) Inside: 6 ft. 4 in. (1.93 m)
Beam5 ft. 4 in. (1.63 m) Inside: 2 ft. 6 in. (0.76 m)
Beam - Meters3.07
Beam - Meters1.63
Beam - Inches121
Beam - Inches64
Weight - Detail2,853 lbs. (1,297 kg)
Weight - Detail95 lbs. (43 kg)
Weight - kg1294.1
Weight - kg43.09
Weight - lbs.2853
Weight - lbs.95
Length [deck]22 ft. 11 in. (6.99 m)
Length [deck]5 ft. 8 in. (1.73 m)
Length - Feet28
Length - Feet8.5
Length overall - Detail28 ft. (8.53 m)
Length overall - Detail8 ft. 6 in. (2.6 m)
Length overall - Meters8.53
Length overall - Meters2.59
Length overall - Inches336
Length overall - Inches102
Length - Metersnot available
Length - Meters2.6
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeInflatable Rigid
Hull typeInflatable Rigid
Pontoon and Inflatable Specific
Tube diameter24 in. (0.61 m)
Tube diameter16 in. (0.40 m)
Engine and Drivetrain
Fuel tank capacity - Detail202 gal. (765 l)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters764.65
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal202
Fuel tank capacity - Galnot available
Drive typeOutboard - Twin
Drive typeOutboard
Engine max250 - 450 hp (186.5 - 335.7 kW)
Engine max8 - 10 hp (6 - 7.5 kW)
Operational Info
Water capacity12 gal. (45 l)
Water capacitynot available
Maximum capacity5,034 lbs. (2,284 kg)
Maximum capacity1,115 lbs. (506 kg)
Maximum people25
Maximum people4