Detailed Evaluation & Buyer Recommendation
AB Inflatables 24 VST 2013 vs AB Inflatables A 10 2011 — Which Inflatable Rigid Fits Your Needs?
When two boats share the same hull type — in this case both the AB Inflatables 24 VST 2013 and the AB Inflatables A 10 2011 are inflatable rigid designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
Size is the most obvious dividing line here. The AB Inflatables 24 VST 2013 measures 24,0 feet overall (2013), giving it roughly 13,5 additional feet of deck space compared to the AB Inflatables A 10 2011 at 10,5 feet (2011). Weight tells a clearer story for trailering families: the AB Inflatables 24 VST 2013 tips the scales at 2 402 lbs — 2 265 lbs more than the AB Inflatables A 10 2011 at 137 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 250 hp, the AB Inflatables 24 VST 2013 has a 235-hp advantage over the AB Inflatables A 10 2011's 15-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
For family outings this is probably the sharpest distinction between the two. The AB Inflatables A 10 2011 is rated for 5 passengers, while the AB Inflatables 24 VST 2013 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the AB Inflatables A 10 2011 could be the deciding factor.
Bottom line: Choose the AB Inflatables A 10 2011 if your priority is putting more people on the water — it handles 5 passengers and at 10,5 ft it has the deck room to back that rating up comfortably. The AB Inflatables 24 VST 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 2 that costs less to run day-to-day.
General Boat Info
MakeAB Inflatables
MakeAB Inflatables
Model Year2013
Model Year2011
Measurements / Dimensions
Beam9 ft. 4 in. (2.84 m) 5 ft. 5 in. (1.64 m) inside
Beam5 ft. 5 in. (1.65 m) Inside: 2 ft. 8 in. (0.81 m)
Beam - Meters2.84
Beam - Meters1.65
Beam - Inches112
Beam - Inches65
Weight - Detail2,402 lbs. (1,092 kg)
Weight - Detail137 lbs. (62 kg)
Weight - kg1089.53
Weight - kg62.14
Weight - lbs.2402
Weight - lbs.137
Length [deck]19 ft. 3 in. (5.87 m)
Length [deck]7 ft. 11 in. (2.41 m)
Length - Feet24
Length - Feet10.5
Length overall - Detail24 ft. (7.31 m)
Length overall - Detail10 ft. 6 in. (3.2 m)
Length overall - Meters7.32
Length overall - Meters3.2
Length overall - Inches288
Length overall - Inches126
Body / Hull
Hull materialFiberglass
Hull materialAluminum
Hull typeInflatable Rigid
Hull typeInflatable Rigid
Pontoon and Inflatable Specific
Tube diameter24 in. (0.61 m)
Tube diameter17 in. (0.43 m)
Engine and Drivetrain
Fuel tank capacity - Detail79 gal. (300 l)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters299.05
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal79
Fuel tank capacity - Galnot available
Horsepower150 hp (111.9 kW) recommended
Horsepowernot available
Engine max250 hp (186.5 kW)
Engine max15 - 20 hp (11.2 - 14.9 kW)
Drive typenot available
Drive typeOutboard
Operational Info
Water capacity17 gal. (65 l)
Water capacitynot available
Maximum capacity3,978 lbs. (1,808 kg)
Maximum capacity1,300 lbs. (591 kg)
Maximum people2
Maximum people5