AB Inflatables 13 DLX 2010 boat specs
AB Inflatables
AB Inflatables 13 DLX 2010
2010
View full specs →
VS
AB Inflatables A 13 2012 boat specs
AB Inflatables
AB Inflatables A 13 2012
2012
View full specs →

AB Inflatables 13 DLX 2010 vs AB Inflatables A 13 2012 — A Close Look at Two Inflatable Rigids

When two boats share the same hull type — in this case both the AB Inflatables 13 DLX 2010 and the AB Inflatables A 13 2012 are inflatable rigid designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — AB Inflatables 13 DLX 2010 at 13,2 ft versus AB Inflatables A 13 2012 at 13,0 ft. Weight tells a clearer story for trailering families: the AB Inflatables 13 DLX 2010 tips the scales at 589 lbs — 335 lbs more than the AB Inflatables A 13 2012 at 254 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 40 hp for the AB Inflatables 13 DLX 2010 and 25 hp for the AB Inflatables A 13 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 7 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The AB Inflatables A 13 2012 comes in at 10 lbs per hp versus 15 lbs per hp for the AB Inflatables 13 DLX 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The AB Inflatables 13 DLX 2010 and AB Inflatables A 13 2012 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAB Inflatables
MakeAB Inflatables
Model13 DLX
ModelA 13
Model Year201
Model Year2012
Measurements / Dimensions
Beam6 ft. 1 in. (1.85 m) Inside: 3 ft. 1 in. (0.94 m)
Beam6 ft. 3 in. (1.9 m) Inside: 3 ft. (0.91 m)
Beam - Meters1.85
Beam - Meters1.91
Beam - Inches73
Beam - Inches75
Weight - Detail589 lbs. (267 kg)
Weight - Detail254 lbs. (105 kg)
Weight - kg267.17
Weight - kg115.21
Weight - lbs.589
Weight - lbs.254
Length [deck]9 ft. 9 in. (2.97 m)
Length [deck]10 ft. 6 in. (3.18 m)
Length - Meters3.96
Length - Metersnot available
Length - Feet13.17
Length - Feet13
Length overall - Detail13 ft. 2 in. (3.96 m)
Length overall - Detail13 ft. (3.95 m)
Length overall - Meters4.01
Length overall - Meters3.96
Length overall - Inches158
Length overall - Inches156
Body / Hull
Hull materialFiberglass
Hull materialAluminum
Hull typeInflatable Rigid
Hull typeInflatable Rigid
Pontoon and Inflatable Specific
Tube diameter18 in. (0.46 m)
Tube diameter19 in. (0.48 m)
Engine and Drivetrain
Fuel tank capacity - Detail18 gal. (70 l)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters68.14
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal18
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max40 - 60 hp (29.8 - 44.8 kW)
Engine max25 - 40 hp (18.7 - 29.8 kW)
Operational Info
Maximum capacity1,659 lbs. (754 kg)
Maximum capacity1,774 lbs. (965 kg)
Maximum people7
Maximum people7

AB Inflatables 13 DLX 2010 vs AB Inflatables A 13 2012 — Common Questions

Which is the larger boat — the AB Inflatables 13 DLX 2010 or the AB Inflatables A 13 2012?
The AB Inflatables 13 DLX 2010 is the longer of the two at 13,2 feet overall. The AB Inflatables A 13 2012 comes in at 13,0 feet, making it roughly 0,2 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the AB Inflatables 13 DLX 2010 or the AB Inflatables A 13 2012?
For trailering, the AB Inflatables A 13 2012 has the edge at 254 lbs dry weight versus 589 lbs for the AB Inflatables 13 DLX 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The AB Inflatables 13 DLX 2010 is rated to a maximum of 40 hp, giving it the larger power ceiling. The AB Inflatables A 13 2012 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The AB Inflatables 13 DLX 2010 is Coast Guard rated for 7 passengers, while the AB Inflatables A 13 2012 is certified for 7. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The AB Inflatables A 13 2012 has a better power-to-weight ratio at 10 lbs per hp compared to 15 lbs per hp for the AB Inflatables 13 DLX 2010. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The AB Inflatables A 13 2012 measures 75" wide, compared to 73" for the AB Inflatables 13 DLX 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the AB Inflatables 13 DLX 2010 and AB Inflatables A 13 2012 from the same manufacturer?
Yes — both the AB Inflatables 13 DLX 2010 and the AB Inflatables A 13 2012 are built by AB Inflatables. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.