AB Inflatables 12 AL 2010 boat specs
AB Inflatables
AB Inflatables 12 AL 2010
2010
View full specs →
VS
AB Inflatables 12 VST 2013 boat specs
AB Inflatables
AB Inflatables 12 VST 2013
2013
View full specs →

AB Inflatables 12 AL 2010 vs AB Inflatables 12 VST 2013 — A Close Look at Two Inflatable Rigids

When two boats share the same hull type — in this case both the AB Inflatables 12 AL 2010 and the AB Inflatables 12 VST 2013 are inflatable rigid designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — AB Inflatables 12 AL 2010 at 12,0 ft versus AB Inflatables 12 VST 2013 at 12,0 ft. Weight tells a clearer story for trailering families: the AB Inflatables 12 VST 2013 tips the scales at 442 lbs — 240 lbs less than the AB Inflatables 12 AL 2010 at 202 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 25 hp for the AB Inflatables 12 AL 2010 and 40 hp for the AB Inflatables 12 VST 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The AB Inflatables 12 AL 2010 comes in at 8 lbs per hp versus 11 lbs per hp for the AB Inflatables 12 VST 2013. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The AB Inflatables 12 AL 2010 and AB Inflatables 12 VST 2013 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAB Inflatables
MakeAB Inflatables
Model12 AL
Model12 VST
Model Year201
Model Year2013
Measurements / Dimensions
Beam6 ft. 1 in. (1.85 m) Inside: 2 ft. 9 in. (0.84 m)
Beam5 ft. 10 in. (1.81 m) 2 ft. 10 in. (0.86 m) inside
Beam - Meters1.85
Beam - Meters1.78
Beam - Inches73
Beam - Inches7
Weight - Detail202 lbs. (92 kg)
Weight - Detail442 lbs. (201 kg)
Weight - kg91.63
Weight - kg200.49
Weight - lbs.202
Weight - lbs.442
Length [deck]9 ft. 6 in. (2.89 m)
Length [deck]9 ft. 2 in. (2.76 m)
Length - Feet12
Length - Feet12
Length overall - Detail12 ft. 0 in. (3.66 m)
Length overall - Detail12 ft. (3.65 m)
Length overall - Meters3.66
Length overall - Meters3.66
Length overall - Inches144
Length overall - Inches144
Body / Hull
Hull materialAluminum
Hull materialFiberglass
Hull typeInflatable Rigid
Hull typeInflatable Rigid
Pontoon and Inflatable Specific
Tube diameter18 in. (0.46 m)
Tube diameter18 in. (0.46 m)
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Engine max25 hp (18.7 kW)
Engine max40 hp (29.8 kW)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail10.5 gal. (40 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters41.64
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal10.5
Horsepowernot available
Horsepower30 hp (22.4 kW) recommended
Operational Info
Maximum capacity2,032 (92 kg)
Maximum capacity1,344 lbs. (611 kg)
Maximum people6
Maximum people6

AB Inflatables 12 AL 2010 vs AB Inflatables 12 VST 2013 — Common Questions

Which is the larger boat — the AB Inflatables 12 AL 2010 or the AB Inflatables 12 VST 2013?
The AB Inflatables 12 VST 2013 is the longer of the two at 12,0 feet overall. The AB Inflatables 12 AL 2010 comes in at 12,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the AB Inflatables 12 AL 2010 or the AB Inflatables 12 VST 2013?
For trailering, the AB Inflatables 12 AL 2010 has the edge at 202 lbs dry weight versus 442 lbs for the AB Inflatables 12 VST 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The AB Inflatables 12 VST 2013 is rated to a maximum of 40 hp, giving it the larger power ceiling. The AB Inflatables 12 AL 2010 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The AB Inflatables 12 AL 2010 is Coast Guard rated for 6 passengers, while the AB Inflatables 12 VST 2013 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The AB Inflatables 12 AL 2010 has a better power-to-weight ratio at 8 lbs per hp compared to 11 lbs per hp for the AB Inflatables 12 VST 2013. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The AB Inflatables 12 AL 2010 measures 73" wide, compared to 7" for the AB Inflatables 12 VST 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the AB Inflatables 12 AL 2010 and AB Inflatables 12 VST 2013 from the same manufacturer?
Yes — both the AB Inflatables 12 AL 2010 and the AB Inflatables 12 VST 2013 are built by AB Inflatables. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.