Detailed Evaluation & Buyer Recommendation
AB Inflatables 10 AL 2013 vs AB Inflatables 28 VST 2011 — Which Inflatable Rigid Fits Your Needs?
When two boats share the same hull type — in this case both the AB Inflatables 10 AL 2013 and the AB Inflatables 28 VST 2011 are inflatable rigid designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
Size is the most obvious dividing line here. The AB Inflatables 28 VST 2011 measures 28,0 feet overall (2011), giving it roughly 17,5 additional feet of deck space compared to the AB Inflatables 10 AL 2013 at 10,5 feet (2013). Weight tells a clearer story for trailering families: the AB Inflatables 28 VST 2011 tips the scales at 2 853 lbs — 2 736 lbs less than the AB Inflatables 10 AL 2013 at 117 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 250 hp, the AB Inflatables 28 VST 2011 has a 230-hp advantage over the AB Inflatables 10 AL 2013's 20-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
For family outings this is probably the sharpest distinction between the two. The AB Inflatables 28 VST 2011 is rated for 25 passengers, while the AB Inflatables 10 AL 2013 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the AB Inflatables 28 VST 2011 could be the deciding factor.
Bottom line: Choose the AB Inflatables 28 VST 2011 if your priority is putting more people on the water — it handles 25 passengers and at 28,0 ft it has the deck room to back that rating up comfortably. The AB Inflatables 10 AL 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeAB Inflatables
MakeAB Inflatables
Model Year2013
Model Year2011
Measurements / Dimensions
Beam5 ft. 5 in. (1.66 m) 2 ft. 8 in. (0.82 m) inside
Beam10 ft. 1 in. (3.07 m) Inside: 6 ft. 4 in. (1.93 m)
Beam - Meters1.65
Beam - Meters3.07
Beam - Inches65
Beam - Inches121
Weight - Detail117 lbs. (53 kg)
Weight - Detail2,853 lbs. (1,297 kg)
Weight - kg53.07
Weight - kg1294.1
Weight - lbs.117
Weight - lbs.2853
Length [deck]7 ft. 11 in. (2.42 m)
Length [deck]22 ft. 11 in. (6.99 m)
Length - Feet10.5
Length - Feet28
Length overall - Detail10 ft. 6 in. (3.19 m)
Length overall - Detail28 ft. (8.53 m)
Length overall - Meters3.2
Length overall - Meters8.53
Length overall - Inches126
Length overall - Inches336
Body / Hull
Hull materialAluminum
Hull materialFiberglass
Hull typeInflatable Rigid
Hull typeInflatable Rigid
Pontoon and Inflatable Specific
Tube diameter17 in. (0.43 m)
Tube diameter24 in. (0.61 m)
Engine and Drivetrain
Horsepower10 hp (7.5 kW) recommended
Horsepowernot available
Engine max20 hp (14.9 kW)
Engine max250 - 450 hp (186.5 - 335.7 kW)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail132 gal. (500 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters499.67
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal132
Drive typenot available
Drive typeOutboard - Twin
Operational Info
Maximum capacity1,300 lbs. (591 kg)
Maximum capacity5,035 lbs. (2,284 kg)
Maximum people5
Maximum people25
Water capacitynot available
Water capacity52 gal. (200 l)